Corsteel Products - 75 Ton Preform Press Specs

75-TON STANDARD / DUAL LAYER PREFORM PRESS SPECIFICATIONS

Note: Specifications for reference only. All dimensions and performance figures are built to suit customer’s requirement.

DIMENSIONS (LxWxH)	Press only 66" x 74" x 90" (1.6m x 1.9m x 2.3m)
	Hydraulic unit only 40" x 60" x 63" (1m x 1.5m x 1.6m)
	Press and hydraulic unit 100" x 74" x 90" (2.5m x 1.9m x 2.3m)
WEIGHT (approx.)	9500 lbs. (4300 kg)
PRESS TONNAGE	13 to 75-ton (12~68 metric ton) variable
OIL RESERVOIR CAPACITY	120 us gallons (454 L)
TYPE OF HYDRAULIC OIL	Tellus^TM46
MAXIMUM PRESSURE	High pressure 3000 psi (21 MPa)
	High volume 350 psi (2.4 MPa)
DAYLIGHT	1
DAYLIGHT CLEARANCE	24" (610mm)
CLEARANCE BETWEEN POSTS	10 ½" x 10 ½" (266mm x 266mm)
MOLD MOUNTING PATTERN	Left to Right - 7" (177 mm) Front to Back - 8" (203 mm) (quick change optional)
WORKING AREA UNDER MOLD	8" x 8" (203mm x 203mm)
PRESS CYLINDER STROKE	12" (305 mm)
HOPPER CAPACITY	8000 in³(131 L)
WEIGHING CAPACITY	1.1 LBS., 500 GRAMS
SCALE WEIGHT TOLERANCES	+/- .004 lbs., +/- 2.0 g. (depending on material)
INTERNAL CONTROLLER	Allen Bradley^TM SLC 502 120 VAC out
PLC INTERFACE	Uniop^TM
AIR REQUIREMENTS	80 psi at 2 scfm (dry air), (.55 MPa at 0.085 m³ /min)
COOLING REQUIREMENT	Water cooler, 8 GPM minimum @ 85° F (30L/min @29° C). adjust flow rate with rise in temperature (air cooled optional)
POWER REQUIREMENTS	Country dependent
CYLINDER SPEEDS	Down on regen 400 ipm (16.8 mm/s) Pressing 20 ipm ( 22.3 mm/s) Return 525 ipm (8.5 mm/s)
CYCLE TIME	Single layer 8 - 15 sec. Dual layer 15-20 sec. (depending upon # of bumps and weight required)