Corsteel Products - Dual Layer Preform (IH) Specs

DUAL LAYER PREFORM PRESS (IH STYLE) SPECIFICATIONS

Note: Specifications for reference only. All dimensions and performance figures are built to suit customer’s requirement.

DIMENSIONS (LxWxH)	71"x106"x109" (1.8m x 2.69m x 2.77m)
WEIGHT (approx.)	9500 lbs. (4300 kg)
DAYLIGHT	1
DAYLIGHT CLEARANCE	24" (610mm)
CLEARANCE BETWEEN POSTS	10 ½" x 10 ½" (266mm x 266mm)
MOLD MOUNTING PATTERN	Left to Right - 7" (177 mm) Front to Back - 8" (203 mm) (quick change optional)
WORKING AREA UNDER MOLD	8" x 8" (203mm x 203mm)
FRICTION HOPPER CAPACITY	8,000 in³(131 L) @ 300 lbs. (136 kg) maximum
BACKING HOPPERS CAPACITY	2,000 in³(33 L) 2 hoppers, @ 100lbs (46kg) maximum
WEIGHING CAPACITY	1.1 lbs., (500 g.)
SCALE WEIGHT TOLERANCES	+/- .004 lbs., +/- 2.0 g. (depending on material)
PRESS TONNAGE	13 to 75-ton (12~68 metric ton) variable
STROKE	12" (305 mm)
MAXIMUM PRESSURE	High pressure 3000 psi (21 MPa) High volume 350 psi (2.4 MPa)
RESERVOIR CAPACITY	200 us gallons (757 L)
TYPE OF HYDRAULIC OIL	Tellus^TM46
INTERNAL CONTROLLER	Allen Bradley^TM SLC 502 120 VAC out
PLC INTERFACE	Uniop^TM
AIR REQUIREMENTS	80 psi @ 2 scfm (dry air), (.55 MPa at 0.085 m³ /min)
COOLING REQUIREMENT	Water cooler, 8 GPM minimum @ 85° F (30L/min @29° C). adjust flow rate with rise in temperature (air cooled optional)
POWER REQUIREMENTS	Location dependent
CYLINDER SPEEDS	Down on regen 400 ipm (1008 mm/min) Pressing 20 ipm ( 508 mm/min) Return 525 ipm (13.3 mm/min)
CYCLE TIME	Single layer 8 - 15 sec. Dual layer 15-20 sec. (depending upon # of bumps and weight required)