GRINDER/SLOTTER/CHAMFER SPECIFICATION
Note: Specifications for reference only. All dimensions and performance figures are built to suit customer’s requirement.
Dimension (LxWxH)
117" x 62" x 70" (3m x 1.6m x 1.8m)
Weight (Tank empty)
5000 lbs. (236 kg) approx.
Oil Reservoir Capacity
106 US Gallon (400 L)
Type of hydraulic oil
Tellus
TM
46
Air requirement
80 psi @2 scfm (dry air)
(.55 MPa at 0.085 m
3
/min)
Cooling requirement
Water cooled, 8 GPM minimum @85° F (30L/min @29° C) adjust flow rate with rise in temperature (air cooling optional)
Power requirement
Country dependent
Internal controller
Allen Bradley
TM
SLC502
120 VAC out
Production rate
10 ppm
SURFACE GRINDING STATION:
Number of spindle
1
Wheel size:
12" (305mm) diameter
Wheel type:
Diamond faced
Maximum vertical adjustment
3" (76.2mm)
Digital read out
Transducer
SLOTTING STATION:
Number of spindle
1
Slotting wheel size:
8" (203.2mm) diameter x 1/8" (3.18mm) thick, part specific
Wheel type
Diamond face
Maximum vertical adjustment of spindle
3" (76.2mm)
Digital read out
Transducer
COMPOUND ANGLE GRINDING STATION:
Number of spindle
2
Wheel size
9" (228.6mm) diameter
Wheel type
diamond faced
Maximum vertical adjustment
3" (76.2mm)
Maximum rotational adjustment
+ 10 degrees from vertical. minus 0-5 degrees from vertical depending on part length.
Digital read out
transducer for x-y and rotational axis
PART SIZE CAPABILITY:
Max. length:
11" (279.4mm)
Max. width:
3" (76.2mm)
Min width:
1 1/2" (38.1mm)
Max. thickness:
1" (25.4mm)
Min. thickness:
1/4" (6.4mm)
Allen Bradley is the trade mark of Rockwell International Corporation.
Tellus is the trade mark of Shell Canada Products Ltd.
GRINDER / SLOTTER / CHAMFER
ALL PRODUCTS
Specifications
Request Info
© Copyright 2000 Corsteel Hydraulics Limited. Designed by
Intecs
.