SLAB PREFORM PRESS SPECIFICATIONS
Note: Specifications for reference only. All dimensions and performance figures are built to suit customer’s requirement.
DIMENSIONS
(LxWxH)
126"x133.5"x132" (3.2m x 3.4m x 3.4m)
WEIGHT
(approx.)
12,500 lbs. (5680 kg)
HYDRAULIC UNIT WEIGHT
5,000 lbs. (2270 kg)
OIL RESERVOIR CAPACITY
250 US gallons (956 L)
DAYLIGHT
1
DAYLIGHT CLEARANCE
Left to right between posts 35.5" (901 mm)
Front to back 14" (355 mm)
WEIGHING CAPACITY
25 lbs., (11.36kg.)
SCALE WEIGHT TOLERANCES
+/- .15 lbs., (+/- 68 g. ) Material dependent
FRICTION HOPPER CAPACITY
15,000 in
3
(136lbs max)
246 L (136 kg.)
BACKING HOPPERS CAPACITY
15,000 in
3
(136lbs max)
246 L (136 kg.)
PRESS TONNAGE
50 to 150-ton (45~136 metric ton) variable
STROKE
16" (406.4 mm)
MAXIMUM PRESSURE
High pressure 2,650 psi (18.6 MPa)
High volume 350 psi (2.45 MPa)
TYPE OF HYDRAULIC OIL
Tellus
TM
46
INTERNAL CONTROLLER
Allen Bradley
TM
SLC 503
PLC INTERFACE
Uniop
TM
AIR REQUIREMENTS
80 psi @ 2 scfm. (dry air), (.55 MPa at 0.085 m
3
/min)
COOLING REQUIREMENT
Water cooler, 8 GPM minimum @ 85° F (30L/min @29° C). adjust flow rate with rise in temperature (air cooled optional)
POWER REQUIREMENTS
Location dependent
CYLINDER SPEEDS
Down on regen 306 ipm (130 mm/s)
Pressing 20 ipm ( 8.5 mm/s)
Return 308 ipm (130 mm/s)
CYCLE TIME
Single layer 8 - 15 sec.
Dual layer 35-50 sec.
(depending upon # of bumps and weight required)
Allen Bradley is the trade mark of Rockwell International Corporation.
Uniop is the trade mark of EXOR Electronic R&D
Tellus is the trade mark of Shell Canada Products Ltd.
SLAB PREFORM PRESS
ALL PRODUCTS
Specifications
Request Info
© Copyright 2000 Corsteel Hydraulics Limited. Designed by
Intecs
.