|
10 Litre Lab Mixer
This 20-liter mixer (total volume) is designed to be a self-contained single unit, capable of mixing up to 10 liters (working volume).
Standard Features
The mixer uses two ploughs, specially designed to mix the material thoroughly and evenly. There are two end scrapers located in the mixing chamber to prevent material from building up at the ends and not mixing properly. The ploughs are turned using 1-hp motor through an inline gear reducer.
There is a flex coupling which connects the gear reducer to the main motor. There is one chopper located on the back of the mixer. The chopper is equipped with blade type knives and driven by 1/2 hp motor. The chopper shaft uses adjustable air purge seals, which prevent the dust from leaking past the chopper shaft.
|
Options
- Breakers
- This machine is 460 volt/3PH/60 Hz
- Electrical Plug
- PLC control
|
Specifications
|
DIMENSIONS (L x W x H)
|
31" x 32.5" x 50"
|
|
MIXER WEIGHT
|
1000 LBS (APPROXIMATE)
|
|
WORKING CAPACITY
|
10 LITERS
|
|
TOTAL VOLUME
|
20 LITERS
|
|
MAIN DRIVE SPEED
|
80 – 340 R.P.M.
|
|
MAIN DRIVE INPUT
|
1 HP
|
|
NUMBER OF PLOWS
|
2 PLUS 2 END SCRAPERS
|
|
DRUM DIMENSIONS
|
12" I.D. x 11" LONG
|
|
CHARGING PORT
|
6 INCHES SQUARE (FLANGED)
|
|
AIR VENT PORT
|
2 INCH DIAMETER (FLANGED)
|
|
DISCHARGE PORT
|
4 INCH SQUARE
|
|
ACCESS DOORS
|
1 ONLY, 7" x 8"
|
|
NUMBER OF CHOPPERS
|
1
|
|
CHOPPER MOTORS
|
1/2 HP AT 3,600 R.P.M.
|
|
CHOPPER BLADES
|
BLADE TYPE – STARS AND BARS
|
|
AIR PURGE SEALS
|
ON CHOPPER AND MAIN SHAFTS
|
|
POWER REQUIREMENTS
|
460 V, 7 A, 3 PH, 60 Hz
|
|
CONTROL VOLTAGE
|
120 V, 1A, 1 PH, 60 Hz
|
|
PLC CONTROL
|
MICROLOGIX ALLEN BRADLEY
|
|
|
|
