The 900 TON CURE PRESS is designed to reduce the labor associated with the handling of brake production molds.
Standard Features
There is an operator man lift elevating platform, which will allow the operator to travel up to each platen and remove the cured slabs and replace it with a formed preform or bagged preform mix.
The program may also be adjusted internally to the needs of the customer.
Options
§3 Daylight.
§Breakers.
§Constant Pressure.
§Current Monitor.
§Electrical Plug, DIN rail mounted inside panel.
§Oil Low Level switch.
§Prefill.
§Pressure Transducer.
§This machine is 460 volt/ 60 Hz.
§Display screen. type
§Water Valve.
§Power take-off manifold & hoses for eject cylinders.
Specifications
GENERAL
PRESS AND HYDRAULIC UNIT DIMENSIONS (L x W x H)
97" x 145" x 194"
PRESS ONLY WEIGHT
62,500 LBS.
HYDRAULIC UNIT WEIGHT
4500 LBS. EMPTY
6200 LBS. FULL
PRESS TONNAGE
90 TO 900 TON MAXIMUM
CYLINDER BORE
30 INCH
CYLINDER STROKE MAXIMUM
22 INCH
JACK CYLINDER DIAMETER
5 INCH
DAYLIGHT AREA
32" WIDE x 39" DEEP
DAYLIGHT CLEARANCE
12.5" WITHOUT MOLD (Mold must be minimum 7.25 inch when closed)
DAYLIGHT NUMBER
4
POWER AND CONTROL
POWER REQUIREMENTS
460V 180A 3PH
HORSEPOWER
50 HP
HIGH PRESS PUMP MAXIMUM PRESSURE
2550 PSI
RESERVOIR CAPACITY
250 GALLONS
TYPE OF HYDRAULIC OIL
AW 46
COOLING REQUIREMENT
WATER @ 10 GAL/MIN AND @ MAX. 85 °F. ADJUST FLOW RATE ACCORDINGLY WITH RISE IN TEMPERATURE
